***PURCHASE AN INNOFADER:*** |
|
|
FADER SLOT: Crossfader Only |
_______________________________________________ |
|  |
| ADAPTER CABLE: 4 pin large. Reversing cable will reverse output. |
| OPTIMAL CURVE DIAL SETTING: 12:00 |
| |
_______________________________________________ |
|  |
| ADAPTER BOARD (included): Adapter (1) |
| OPTIMAL CURVE DIAL SETTING: 12:00 |
| |
_______________________________________________ |
|  |
| SUGGESTED HEIGHT ADJUSTMENT: Lower by 5.0mm.
More info |
| ADAPTER CABLE: 4 pin large. Reversing cable will reverse output. |
| |
_______________________________________________ |
Installation Notes: |
| Multiple Innofader models will work for this mixer. The preferred model is listed first based on the best performance / cost tradeoff. |
| Also fits the original Innofader Pro. Please follow the instructions for VCA hookup |
