***PURCHASE AN INNOFADER:*** |
|
|
FADER SLOT: Crossfader Only |
_______________________________________________ |
|  |
| SUGGESTED HEIGHT ADJUSTMENT: Please write to us. |
| ADAPTER CABLE: 3 pin small. Cable can be forward or reversed. |
| |
_______________________________________________ |
COMPATIBLE INNOFADER #2:
Innobender |  |
| ADAPTER CABLE: 3 pin small. ***Polarity Test Required***. |
| OPTIMAL CURVE DIAL SETTING: 12:00 |
| |
_______________________________________________ |
Installation Notes: |
| Requires adapter plate included with the Innofader kit |
| Multiple Innofader models will work for this mixer. The preferred model is listed first based on the best performance / cost tradeoff. |
Installation Detailed Description: |
You have two choices for the DJM-400 - either the Innobender or mini Innofader Plus. For both parts, this is a standard installation.
For the mini Innofader Plus, please refer to the online manual. As indicated in the manual, make sure you use the 3 pin cable adapter. The mini can plug in directly and make the green LED turn on but this will not work. You can also see more detailed instructions on our forum here.
Brief instructions for the Innobender are shown here. For more detailed Innobender instructions, please go here. There are also Innobender instructions in German here.
|
