***PURCHASE AN INNOFADER:*** |
|
|
FADER SLOT: Crossfader Only |
_______________________________________________ |
|  |
| ADAPTER CABLE: 4 pin P&G. Reversing cable will reverse output. |
| OPTIMAL CURVE DIAL SETTING: 12:00 |
| |
_______________________________________________ |
|  |
| ADAPTER BOARD (included): Adapter (4) + 4 pin P&G |
| OPTIMAL CURVE DIAL SETTING: 12:00 |
| |
_______________________________________________ |
|  |
| SUGGESTED HEIGHT ADJUSTMENT: Lower by 5.0mm.
More info |
| ADAPTER CABLE: 4 pin P&G. Reversing cable will reverse output. |
| |
_______________________________________________ |
Installation Notes: |
| Requires adapter plate included with the Innofader kit |
| Multiple Innofader models will work for this mixer. The preferred model is listed first based on the best performance / cost tradeoff. |
| Also fits the original Innofader Pro. Please follow the instructions for VCA hookup |
Installation Detailed Description: |
Here is a forum post we did showing the wiring:
DN-X1500S wiring. This is only needed if you have an Innofader Classic. All current models have the adapter wire required.
In addition, you will need a custom adapter plate to fit the Innofader correctly in the X-1500. Please contact us for more info |
