***PURCHASE AN INNOFADER:*** |
|
|
FADER SLOT: Crossfader |
|
Please see here for channel fader details. |
| |
_______________________________________________ |
|  |
| SUGGESTED HEIGHT ADJUSTMENT: Lower by 5.0mm.
More info |
| ADAPTER CABLE: 3 pin small. Cable can be forward or reversed. |
| |
_______________________________________________ |
Installation Notes: |
| Multiple Innofader models will work for this mixer. The preferred model is listed first based on the best performance / cost tradeoff. |
Installation Detailed Description: |
Note that even though the connector has 4 pins, it requires the 3 pin connector to work properly.
Please connect as shown here:  |
